AFM Safecoat Interior ZVOC Paint

$ 25.20
Category:
  • AFM Safecoat Interior ZVOC Paint What You’ll Need Painting Supplies AFM Safecoat Interior ZVOC paint is a premium quality, fast curing paint designed for areas in which the health of the occupants is a concern: schools, hospitals, homes, offices – anywhere people want to reduce their exposure to toxic chemicals. AFM Safecoat ZVOC Paint has almost no odor during application and are odor free once cured. They contain no formaldehyde, ammonia, crystalline silica, ethylene glycol or preservatives found in competing “healthy” brands. Features Benefits Superior, durable finish. Fully tintable in bases. ALL SHEENS dry to a hard, scrubbable enamel finish.  Low odor, safely used by the chemically sensitive for decades. Fights indoor air pollution, limits off gassing. Prevents off gassing from substrates/sub-coatings. Zero VOC content, meets or exceeds all federal and state air quality regulations, including California. No preservatives found in other competing brands. Color Matching Info Your paint will be sent as pure white if no color is specified. We can match any major manufacturer’s colors, like Ben Moore, Behr, Sherwin Williams, etc… Enter color name & number from manufacturer in the box provided  ex. BM Chantilly Lace OC65 OR SUGAR DUST 0011. Please know that monitor settings may differ when previewing colors online. Dark or deep colors may require additional tinting fees, usually about $4-$6 per gallon. We will contact you if tinting fees are due. Please see color matching for more information. Coverage One gallon of AFM Safecoat ZVOC Paint covers approximately 350 square feet, one coat. Samples 2oz Samples Spec Sheet Summary USE ON: AFM Safecoat ZVOC Paint can be used on new or existing, properly primed interior walls and ceilings, properly cured and primed plaster (below 10 pH), masonry, woodwork and primed metal. SURFACE PREP: Surfaces should be sanded and cleaned of dirt, grease, mildew and oil. Cleaning with an odorless, dye-free, all-purpose cleaner such as SafeChoice Super Clean is recommended. To achieve an even, consistent finish, the underlying surface must be evenly sealed. Previously painted surfaces in poor condition need to be scraped and sanded smooth before priming with Safecoat Transitional Primer. Always spot test for adhesion over prior coatings. Before application, coat new wallboard or sheetrock with Safecoat New Wallboard Primecoat. Sand porous new wood and prime with Safecoat Transitional Primer. Water and other stains must be blocked so they do not bleed through. In all cases, the best finish will be achieved with a primer and two finish coats. Environmental conditions are crucial: if the air temperature is too hot or too cold, the product will not cure properly; if the air or the wood is too dry, or there is too much moisture in or on the surface, other problems may result. In addition, many surfaces contain water-soluble tannins or acids which are activated by the application of water based products and will “bleed through” to the surface. All of these conditions can be avoided with proper preparation. Finally, Safecoat products are formulated to work together. Optimum results are best obtained by using a Safecoat primer, for example, before applying Safecoat paint. Of course, always read the application instructions before beginning the job. APPLICATION: Always have adequate ventilation. Surface should be completely dry before application. Before using, stir well, then apply with a high-quality nylon or synthetic bristle brush or roller of appropriate nap (1/4”-3/8” nap recommended). Do not apply in thick films or load paint onto the surface. Thin coats are better than one thick coat. 2 coats is usually sufficient for most jobs, but darker colors or substrate may require a 3rd coat. COVERAGE: One gallon of AFM Safecoat Interior ZVOC paint covers approximately 350 square feet, one coat. RECOATING: Under normal-ideal conditions, AFM Safecoat Interior ZVOC paint can be recoated after 4 hours. For best results, wait at least 8 hours before recoating. Normal conditions include: a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55°F. Thick application, high humidity, or conditions other than normal will cause paint to dry and cure more slowly. Drying and curing time can be accelerated by moving fresh air over the painted surface, but recoating before the time period noted above is not recommended.

CD - THE BELFAST SESSIONS

This, our latest collection of songs, was recorded at RedBox Studios in Belfast. We’ve wanted to record there for awhile now and finally the timing was right for all. Dónal O’Connor one of the owners, produced it with expertise, poise, patience and not a few threats, the main one being “no more Guinness till youse get this track right.” Inspirational words indeed! He was somehow able to corral us and steer us in the right direction on each song. I’m sure he’d love to work with us again – maybe! We had a great time all together recording there, and hopefully dear fans you’ll enjoy listening. In these uncertain times remember, music hath charms to soothe a savage breast. I think that was a quote from Paul McCartney, or possibly Bob Dylan. Enjoy!

The Belfast Sessions (2025)

Track Listing:

  1. BOYS OF BELFAST
  2. BELFAST BOOZELEERS
  3. DOWN BY THE LAGAN SIDE
  4. IRISH NAVIES
  5. MY BELFAST LOVE
  6. A NIGHT IN BUSHMILLS
  7. NO DOUBT ABOUT IT
  8. I’LL TELL YOU BOYS IT’S WHISKEY
  9. PRODIGAL SON
  10. NEW LINE TO DUBLIN
  11. PADDY’S DREAM
  12. SONG FOR BELFAST
  13. DAYTRIP TO BELFAST

Related products